Drilling and Milling M/CDrilling and Milling M/C Wemas AT 500-HSA

Drilling and Milling M/C Wemas AT 500-HSADrilling and Milling M/C Wemas AT 500-HSADrilling and Milling M/C Wemas AT 500-HSADrilling and Milling M/C Wemas AT 500-HSADrilling and Milling M/C Wemas AT 500-HSADrilling and Milling M/C Wemas AT 500-HSADrilling and Milling M/C Wemas AT 500-HSADrilling and Milling M/C Wemas AT 500-HSA

Offer

stock-no.:
0200509
type of machine:
Drilling and Milling M/C
make:
Wemas
model:
AT 500-HSA
year of manufacture:
2002
type of control:
conventional
country of origin:
Switzerland
freight basis:
EXW, free on truck unpacked
storage location:
Leipzig 1
delivery time:
immediately
price:
on request

technical details

bore capacity in steel (diameter):
30 mm
x-travel:
400 mm
y-travel:
180 mm
turning diameter over bed:
300 mm
turning diameter over bed slide:
170
center height over support:
150 mm
centre distance:
500 mm
spindle bore:
Ø 26mm (MK3) mm
tailstock quill taper MT:
MK3
quill stroke:
60 mm
revolution per minute:
160/250/400/630/1000/1800 U/min
feed steps:
0,075 - 0,150 U/min.
output:
550 Watt
weight of the machine ca.:
186 kg
dimension machine approx.LxWxH:
1,1 x 0,7 x 0,9 m

additional information

Use for drilling, milling and turning operations.
Turning:
Support swivels 60° right/left; travel 85mm;four-way tool clamp; 4-jaw lathe chuck Ø 130mm; threading possible.
Milling:
MK3 mount; slot milling max. Ø 20mm; face milling max. Ø 63mm; spindle stroke 90mm; table area LxW = 150 x 200mm; speed 125 - 1,600 rpm / 12 steps.
Drilling:
Drilling power max. 30mm; throat 172mm; spindle swivel 360°; vertical adjustment 80mm; MK3 mount; equipment currently with drill chuck 1 - 13mm; table area L: 150 x W:200mm with T-slot; speed 125 - 1,600 rpm / 12 steps.

Operation via ON/OFF switch left/right

machine request – Drilling and Milling M/C | Wemas AT 500-HSA

« back