WEMA Vogtland BTrPi 900/8

TRANSFER MACHINE with 3 work station and 15 drill & mill spindles

for example the production of a high quantity of armatures

Other technical information about the machine:

• workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec.
• drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm
• left 3x drill & mill spindle and 2x thread cutting spindle
• right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable
• 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left
• 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left

Equipment:

• 2 hydraulic aggregate
• chip conveyor
• belt filter produced by Filtertechnik Gera (fleece band 430mm)
• control panel
• manual switch

i.D.