Sheet straightening machineSheet straightening machineWMW GOTHA UBR 16x2500 /1-10

Sheet straightening machine WMW GOTHA UBR 16x2500 /1-10Sheet straightening machine WMW GOTHA UBR 16x2500 /1-10

Offer

stock-no.:
0100549
type of machine:
Sheet straightening machine
make:
WMW GOTHA
type:
UBR 16x2500 /1-10
year of manufacture:
1974/Retrofit 2017
type of control:
conventional
country of origin:
Germany
freight basis:
on request
storage location:
Leipzig 5
delivery time:
modernization
price:
on request

technical details

plate width:
2500 mm
plate thickness:
16 mm
smallest sheet thickness:
6 mm
Number of Straightening rolls:
11
roll diameter:
180 mm
straightening roll diameter:
180 mm
straightening feed:
10-16-20 m/min
throughput speed:
10 m/min
total power requirement:
75 kW
weight of the machine ca.:
56 t
space requirements approx. LxWxH:
5,0x2,5x4,0 m

additional information

The machine will be modernized and refurbished. If you are interested, please contact us and we would like send you an offer.
cold sheet metal levelling machine
techn. dimensions:
- max. throughput between the end switch: 2650mm
equipment:
- 6 pcs roller conveyors for intake/feed and outlet/ run-out, model U-beam construction with each 1 gear motor per roll conveyor band approx. 6,0 kW, chain drive for all rolls, rolls dia.= 190mm
roll conveyor description:
1 x roller conveyor: 2 pcs. rolls, 2500mm length, roller distance center 800mm, size (W:2,8xD:1,15xH:0,77m)
3x roller conveyor: 3 pcs rolls, 2500mm length,
roller distance center 800/800 mm
size W:2,8xD:1,85xH:0,75m
1x roller conveyor: 4 pcs rolls, 3x2800mm + 1x2330mm length, roller distance center 800/800/550 mm / size W:2,8xD:2,4xH:0.77m
1x roller conveyor: 6pcs rolls,5x2500mm+1x2330mm length,roller distance center 800/400/400/280/270mm, size W:2,8xD:2,4xH:0,77m

- revise of 39 support mounts
- clean, inspect the bearings (replace if necessary), regrease
turning of the outer Diameter
- check of the levelling rolls drive gear, cleaning, checking,
- revision of 13 Cardan shafts
dismantling, cleaning, regrease, mounting
work up 11 piece straightening rolls
check for run-in points, hardness and diameter,
resurfacing via fine grinding
- repainting the entire machine
- replacement of defective oil seals and gaskets, replacing the bearings if necessary
- check of the pre-transmission
- cleaning, checking, replacement of defective oil seals and gaskets,
- replacing the bearings as needed
- verification of screw jack / cleaning, checking,
- replacement of defective oil seals and gaskets, replacing the bearings if necessary
- verification of the screw jack for height adjustment of the lower straightening rolls
cleaning, checking, replacement of defective oil seals and gaskets, replacing the bearings
if necessary

machine request – Sheet straightening machine | WMW GOTHA UBR 16x2500 /1-10

« back